How to repair your Baxi E119 fault , Main and Potterton

How to repair your Baxi E119 fault , Main and Potterton

My name’s Allen Hart and today we’re at a brand-new box a platinum combi boiler installation that will installing and I’m just going to show you how to top the pressure up should you get the a119 fault so as we can see here the fault code on the front of the boiler is flashing a119 and a119 unboxer means a low water pressure so you just have a look at your gauge there and you would see bass below into the red which means that the pressure needs to be topped up so what we’ll do here we’ll show you how to deal with so what we need to do we need to have a look underneath the boiler so underneath the boiler here there’s some valves so then valves at the back without touch them which of these two front ones so these two blue ones are the front so that’s in the bucket Platinum also the same on the box if your tech as well so just as down inverter and both these valves off so these are now both in the off position and then what we need to do is we will slowly but first of all we’ll turn this one on and then we will slowly turn the other valve on here and then when we look on the pressure gauge on the front of the boiler we will see the pressure gauge starts to go up so what we want to do really want to top this up switch just above sort of like the one area so then we need to just slowly top it up a bit Marge to get it above one so I normally do it up to the top of that very merely in between like just over one and a half and then turn it back off on the bottom and then blow valves so we can see that now the fault code is no longer there and now the by the will work so we turn the violent back on it will work we’ve actually topped up to about till here so it’s gone a little bit higher and that’s because we’re still testing this system and but this is just demonstration video for you just to help you thank you for taking the time to watch our video how to repair or refill a buck see your tech and boxy platinum with an A one one nine fault code thank you